Adjustment of high efficiency vibrating sieve
Commonly, the amplitude should be in the range of 5~5.5mm. The max amplitude is 6 mm. It is not allowed to exceed. Otherwise, the factory will not be responsible for any damage caused by this reason. You can read the amplitude value on the indicating disc. (See Fig. 9 a)
The amplitude value can be adjusted by moving the eccentric lump that assembled on the motor axle. Move and make the two eccentric lump overlap more to increase the amplitude, do contrarily to reduce the amplitude. The two motors must be adjusted in the same way at the same time. (See Fig. 9 b)
2) Vibrating direction (throwing angle) (see Fig. 9 c)
The vibrating direction can be adjusted between 0o ~ 45o. Commonly, 20o is for cleaning and 25o for primary cleaning in flourmill. You can adjust vibrating direction by loosening the four fixing bolts and turning the motor to find the most suitable angle.
Warning: This operation must be carried out at the time when the machine is stopped and still. Otherwise, it is very dangerous.
3) Inclination of sieve body
The inclination of sieve body can be adjusted in the range of 0o ~ 12o. For details, please see the table 1. The inclination can be adjusted by loosening the fixing bolt (see Fig. 3) to move the sieve body up or down to up to the required value. You can move the whole sieve body according to the graduation on the indication plate.
Warning: This operation must be carried out at the time when the machine is stopped and still.