Installation of high efficiency vibrating sieve

Time:2018-10-16 17:47 Author:Jinggu Machinery
      1) Install the machine (see Fig 4, 5, 6, 7)

      When the machine is running, it produces the high changing load. This machine must be installed and fixed directly on the floor frame. If there is no floor frame under the installing position, the user must build an extra frame. For the wooden flour, it is not allowed to fix one leg on the beam but the other on the floor. In a word, the solid foundation is a must for installation. In addition, the machine must be screwed on the beam by bolts. Fig. 7 is some installation examples for reference. After installation, you have to make the machine level.

      2) Feeding device

      In the front side of this machine, there is an eccentric conical funnel. You can rotate it to make the stock fall onto the central zone. When connect the intake pipe, adjust the position of eccentric conical funnel to make stock scattered well on the whole width of sieve surface, in order to up to the best performance.

      3) Vibrating motor

      The two vibrating motor must revolve in opposite direction, (see the fig 8). A interlocking device should be set to guarantee the two motor can start/stop or running in step.

Installation of high efficiency vibrating sieve
Installation of high efficiency vibrating sieve

Copyright:http://www.flourmillmachine.org

successful case