Maintenance of high efficiency vibrating sieve
Lubricate the vibrating motor bearings with 3# grease or comparative oil every 2000 working-hours (about three months).
Renew the grease every 5000 working hours (about eight months). Dismount the bearings and cleaning them, then fill grease with the amount of 1/3 bearing volume.
2. Often check and clean the sieve surface. Note: Don’t strike he surface with hammer or other steel things. It is better to clean the sieve surface with a scraper. See Fig.10. Check and replace the damaged sieve surface and cleaning balls in time.
3. Termly check bolts, handle and other fixing parts to make sure they are in normal tight state.
4. Often check rubber parts and replace the broken or dead one in time.